Burimi i energjisë së saldimit I-ARC 525 LAB është ideal për mirëmbajtje, zdrukthtari dhe punë ndërtimi. Ai plotëson nevojat profesionale dhe të specializuara të saldimit dhe është i garantuar nga marka e ekselencës LAB. Projektuar dhe ndërtuar me kujdes në fabrikat tona në San Marino.
Modeli I-ARC 525 LAB jep 250 Amper në rrymë direkte si në MMA ashtu edhe në TIG. Saldimet me elektroda rutile, bazë dhe të veshura me TIG LIFT mbi metale të ndryshme: çelik, inox, gize etj. Një ekran, rregullimi i rrymës së saldimit dhe vlerat e forcës së fillimit të nxehtë dhe harkut janë integruar në panelin e sofistikuar të kontrollit, për të marrë performancë optimale në të gjitha kushtet e saldimit. Tensioni i furnizimit me energji elektrike është trefazor 400 Volt dhe është gjithashtu i pajisur me mbrojtje speciale të hyrjes që lejojnë ruajtjen e performancës adekuate të saldimit edhe në rast të një furnizimi jo optimal me energji elektrike. Veçori veçanërisht e dobishme për ata që shpesh punojnë duke u lidhur me gjeneratorët e motoçikletave (shih tabelën e karakteristikave).
I-ARC 525 LAB është i lehtë për t'u përdorur falë sistemeve të ndihmës së saldimit:
Zgjedhësi saldimi: MMA / TIG LIFT.
Fillimi i nxehtë: lehtëson goditjen e harkut.
Forca e rregullueshme e harkut: për të marrë një saldim optimal me secilën elektrodë është e mundur të rregulloni rritjen e përkohshme të rrymës kur harku elektrik bëhet i shkurtër.
Kundër ngjitjes: ju lejon të shkëputni me lehtësi elektrodën nëse ajo mbetet e ngjitur në copë.
VRD (pajisja e reduktimit të tensionit): reduktim i tensionit pa ngarkesë për të reduktuar rrezikun e goditjeve elektrike në mjedise të veçanta.
Burimet e fuqisë së saldimit të linjës I-ARC 300 LAB janë ideale për punë mirëmbajtjeje, zdrukthtari të lehta dhe për sektorin e ndërtimit. Ato plotësojnë nevojat profesionale dhe të specializuara të saldimit dhe janë të garantuara nga marka e ekselencës LAB. Projektuar dhe prodhuar me kujdes në fabrikat tona në San Marino.
Të gjitha modelet kanë SISTEMIN ekskluziv të Ftohjes CONVAIR që i bën ato veçanërisht të qëndrueshme dhe të qëndrueshme falë temperaturës së reduktuar të funksionimit të transformatorit. Ato janë gjithashtu të pajisura me mbrojtje speciale të hyrjes që lejojnë ruajtjen e performancës adekuate të saldimit edhe në rast të një furnizimi jo optimal me energji elektrike. Veçori veçanërisht e dobishme për ata që shpesh punojnë duke u lidhur me gjeneratorët e motoçikletave (shih tabelën e karakteristikave).
I-ARC 318 LAB jep 180 Amper në rrymë të vazhdueshme për elektrodat e saldimit nga 1,6 deri në 4,0 mm në diametër. Saldimet me rutil dhe elektroda të veshura bazë në metale të ndryshme: çelik, inox, gize etj. dhe me pishtarin special lejon saldimin në modalitetin TIG me goditje me hark "smear".
160 Amp; imput voltage 1Ph 230 Volt
Pulse; Easy Pulse; TIG HF; TIG Lift; TIG 2T/4T; Hot Start; Antisticking; Arc Force.
Microprocessor controlled inverter,TIG, TIG PULSE and MMA welding machine in direct current and alternating current (AC/DC) with high frequency (HF) or LIFT ARC striking.
MMA welding in direct current DC It allows to weld with many types of electrodes and materials: rutile, basic, stainless steel, cast iron, etc.
HOT START adjustable. For easy electrode striking. Useful especially for "difficult-to-start" electrodes.
ARC FORCE adjustable. Enables to control the welding penetration and improve the arc stability.
ANTI – STICKING. No electrode sticking.
AC /DC TIG welding
DC: direct current to weld steel, stainless steel, titanium, copper, bronze, nickel.
AC: alternating current to weld aluminium magnesium and aluminium silicium.
AC EASY: FREQUENCY (Hz) and BALANCE (%) are automatically adjusted depending on the welding parameters set.
PULSE: The welding current is pulsed. Main current "I (Amp)" and base current "(%) I" alternate. Particularly suitable for welding thin thickness, where minimum heating of the piece is necessary, and suitable for welding in all positions.
EASY PULSE: Pulse frequency, "PULSE (Hz)", and base current "(%) I" are adjusted automatically depending on the welding parameters selected.
BI-LEVEL: two different current settings are selectable during welding process. Extremely useful for complex welding, welding over variable thicknesses or for welding on position.
TIG HF / LIFT striking: TIG welding with high frequency arc striking / TIG welding with LIFT ARC striking.
2T (manual): press and keep the torch trigger pressed to weld, the weld will stop as soon as the button is released.
4T (automatic): press and release the torch trigger to start welding, the weld will last until the trigger is pressed and released once again.
SPOT: TIG welding finishes automatically once the pre-set time has elapsed.
Program saving. The mode settings and the parameters set can be saved to the machine for future use. There are 9 programs to be saved.
Tig welding: adjustable parameters
a) Ø mm: Select the diameter of the tungsten electrode. Based on the diameter selected, the machine determines the welding current interval that can be used without damaging the electrode.
b) PREGAS: Pre-gas time adjustment.
c) SLOPE-UP: Adjustment of time at which the welding current is brought from the initial value (arc start) to the main value "I (Amp)".
d) I (Amp): Main welding current adjustment.
e) (%) I: In the "PULSE" and "BILEVEL 4T" modes, it adjusts the base welding current, expressed as a percentage of the main welding current.
f) SLOPE-DOWN: Time at which, once the torch button is released, the welding current is brought from the main value to the final value (end of welding).
g) POSTGAS: Post-gas time adjustment.
h) PULSE (Hz): In the "TIG PULSE" mode, it varies the pulse frequency.
i) BALANCE (%): In the "TIG AC" welding mode at alternating current, it modifies the ratio between the duration of the positive and the negative half waves. Low "balance" values allow for enhanced arc penetration and little electrode wear and tear. High "balance" values allow for better cleaning of the workpiece but increased electrode wear and tear.
l) FREQUENCY (Hz): In the "TIG AC" welding mode at alternating current, it varies the welding current frequency. Low values allow for a better distributed arc. High values allow for a more concentrated arc.
m) T (SPOT): In the "SPOT" mode it varies the duration of the welding point.
200 Amper; Tensioni i imputit 1Ph 230 Volt
Pulse; Pulsi i lehtë; TIG HF; TIG Lift; TIG 2T/4T; Fillimi i nxehtë; Antingjitëse; Forca e harkut.
Saldim MMA në rrymë të vazhdueshme DC
-Lejon saldimin me shumë lloje elektrodash dhe materialesh: rutil, bazë, inox, gize, etj.
Saldim DC TIG-DC: rrymë e drejtpërdrejtë për saldimin e çelikut, çelik inox, titan, bakër, bronz, nikel.
-PULSE: Rryma e saldimit është pulsuese. Rryma kryesore "I (Amp)" dhe rryma bazë "(%) I" alternohen. Veçanërisht i përshtatshëm për saldimin me trashësi të hollë, ku nevojitet ngrohja minimale e pjesës dhe e përshtatshme për saldim në të gjitha pozicionet.